Carmera Module

CM087A

For Side-view E-mirror
Solution

Intruduction

Appearance and mechanism design comply with vehicle safety regulations.

 

68°(H) FOV of image

 

Output image 1280x720 (HDR high dynamic range) can cleary capture environmentally outside view of vehicles.

 

International Protection Marking | IP68/IP69

Application

Through camera modules installed on both sides of vehicles, the image is transmitted to Rearview E-mirror.

 

The biggest advantage of Rearview E-mirror is to eliminate rear obstructions and to show drivers the entire lower blind area.

 

Blind Spot Detection (BSD)|sensors installed on both sides of vehicle can detect blind spots. When cars enter the blind spot area, it will flash and ring through Rearview E-mirror to remind drivers, to reduce collision rate.

Specification

FOV 80°(D) , 68°(H) , 38°(V)
F no F2.0
Lens Composition G+P
Sensor Specification OmniVision,RAW_1/3.8" CMOS_HDR
Sensor Dynamic range 120dB
Output Resolution 1280 x 720
Frame Rate 60fps
Output Format HD-TVI
Power Input 5V
Power Consumption 1450mW(5V/290mA)
Dimensions 31.1 x 23 x 30.5 mm
Operating Temperature -30°C~85°C
Storage Temperature -40℃~85℃

Film Share

Back to list
Inquiry Inquiry
Inquiry