Carmera Module

TC1918

For Side-view E-mirror
Solution

Intruduction

Appearance and mechanism design comply with vehicle safety regulations.

 

71°(H) FOV of image

 

Output image 1920x1080 (HDR high dynamic range) can cleary capture environmentally outside view of vehicles.

 

International Protection Marking | IP68/IP69

 

Application

Through camera modules installed on both sides of vehicles, the image is transmitted to Rearview E-mirror.

 

The biggest advantage of Rearview E-mirror is to eliminate rear obstructions and to show drivers the entire lower blind area.

 

Blind Spot Detection (BSD)|sensors installed on both sides of vehicle can detect blind spots. When cars enter the blind spot area, it will flash and ring through Rearview E-mirror to remind drivers, to reduce collision rate.

Specification

FOV 84.0°(D) , 71.0°(H) , 40.0°(V)
F no F2.6
Lens Composition G
Sensor Specification Sony,RAW_1/2.5" CMOS_HDR_LFM
Sensor Dynamic range 120dB
Output Resolution 1920 x 1080
Frame Rate 60fps
Output Format FPD-LINK III / Raw 12-bit
Power Input 4.7V - 6.3V
Power Consumption 1000mW(5V/200mA)
Dimensions 26.5 x 26.5 x 32.6 mm
Operating Temperature -30°C~85°C
Storage Temperature -40℃~85℃
Back to list
Inquiry Inquiry
Inquiry